Cement & Concrete Testing Equipments

Compaction Factor Apparatus

We are a preeminent organization involved in manufacturing, supplying and trading Compaction Factor Apparatus. Our range is used for determining the work ability of fresh concrete, provided the maximum size of the aggregate does not exceed thirty eight millimeters. Offered range consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame.

Features:

  • Rust proof
  • Fine finish
  • Tough construction

Specifications:

  • It consists of two rigid conical hoppers and a cylinder mounted
  • The lower openings of the hoppers are fitted with hinged trap- doors having quick release catches
  • A circular meter plate is provided to cover the top of the cylinder
  • Supplied complete with one plaster's trowel and one tamping rod, 16mm dia. x 600mm long, one end rounded

Additional Information:
  • Item Code: ASI-519

Flow Table

This is used for measuring the consistency of Pozzolanas and also cement mortar and hydrated lime. Specifications; It consists ofa machined brass table top 250 /-2.5mm. dia mounted on a rigid stand. The table top is reinforced with equally disposed ribs andallowed to conical brass mould 100mm I.D. top dia. and 50mm high. 

Additional Information:
  • Item Code: ASI-523

Vibrating Table

The vibrating Table is used for compacting concrete cubes and cylinders.

Specifications: It is designed to carry a load of 140Kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations down to 2600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor suitable for operation on 1440 volts, 3 phase, 50 cycles, A.C. supply.

Note: Vibrating Tables of Tables top size 75cm x 75cm as well as 100cm are also avaiLable.

Additional Information:
  • Item Code: ASI-590

Compression Testing Machine

Strength of Concrete is a very important aspect during construction. Strength of concrete is obtained by crushing the specimen form of cubes of cylinders. Concrete is carefully designed for a particular compressive strength by the Engineers and specimen is tested by applying load in a compression Testing Machine. Manufactures a range of Compression Testing Machine from 10 Tonnes to 200 Tonnes in different models. Portable models are very convenient and useful for site use where carrying frequently the specimens for testing in a standard Laboratory is inconvenient and uneconomical. With special attachment the machines can also be use for bricks hallow or solid concrete blocks, using appropriate capacity machine In general a Compression Testing Machine consists of a Load Frame with suitable platens and a Pumping Unit with Pressure Gauge, either hand operated or electrically-cum-hand operated. Load Frame and Pumping unit are connected by pressure pipes.

Additional Information:
  • Item Code: ASI-192

Tensile Strength Tester

Used for making tensile strength test (Hand Operated) on cement briquettes. Specifications: The Instrument is suitable for tensile tests upto 1200 Lbs or 540 kg. It is hand operated, with automatic loading by lead shots. Two calibrated scales 100 Ibs X 1 lb. and 50 kg. X 0.5 kg. are engraved. Supplied complete with one brass briquette mould with base plate, lead shots 15kgs, weights to weigh 50kg., 100kg. 150kg. and 200 kg. Spares: Lead shots & Briquette mould brass with base plate.

Additional Information:
  • Item Code: ASI-214

Electrically Operated Tensile Strength Tester

We are offering  Electrically Operated Tensile Strength Tester. The machine can be made opratable for subsequent test only after the sliding weight to its zero position.

Specifications:
The instrument employs a friction- free, accurate, double lever system, the load being applied by means of sliding weight on the top lever. The capacity of the unit is 900 kgs. After fixing the briquette in the jaws, the machine is switched on. The sliding weight slides over the calibrated lever thus applying tension to the specimen. A micro-switchfitted instantly stops the machine on failure of the briquette and on failure the tensile load is accurately read to 0.5 kg. by means of a marker provided on the sliding weight. Suitable for operation on 230 volts, 50 cycles, single phase, A.C. supply. Complete with one brass briquette mould and one base plate.

Small Concrete Test Hammer

The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rest against the surface of the concrete products. The Greater the resistance on the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPa or PSI can be found, with /-20 % of actual.

Specifications:

Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is a attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be richard to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100-700 kg/cm The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case

Additional Information:
  • Item Code: ASI-631

Concrete Permeability Apparatus

We hold specialization in offering Concrete Pemeability Apparatus to the clients. Concrete Pemeability Apparatus is manufactured with ultra grade raw material and latest technology under the guidance of professional in accordance with the quality standards. This product is widely praised by the clients for smooth functionality and long service life. Offered range is duly checked on various parameters of quality in order to deliver a defect-free range at clients' end. This product is available in various specifications and sizes to the esteemed clients.

 

Features:

 

  • Easy installation
  • Optimum performance
  • Safe to use

Additional Information:
  • Item Code: ASI-635

Flexure Testing Machine

(Electrically Operated) Same as above but instead of a hand pumping unit, a separate electrically cum hand operated pumping unit housed in a cabinet is supplied. The pressure gauge 0-100KN x 1KN, On/off switch and a slow/fast level to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protects the unit from over loading.

Additional Information:
  • Item Code: ASI-643

Tile Flexure Testing Machine

Unit for finding flexural strength of clay roofing tiles and Cement flooring tiles. Flexural load is applied on the tiles using lead shots. The machine consists of a stand on which two 40mm dia. bearing rollers or 12mm dia. rollers are placed at centre distance of 150mm, 200mm, 250mm, or 2720mm as the case may be, The third upper roller applies centrally flexural load by means of lever arrangement. Lead shot contained in an upper vessel start flowing into lower container at a rate of 45 to 55 kg per minute of 200kg per minute there by, starting loading the specimen. Arrangement is made such that loading automatically stops when specimen breaks. Supplied without lead shots.
Accessory: Lead shot supplied in packs of 20Kgs.

Additional Information:
  • Item Code: ASI-644

Tile Abrasion Testing Machine

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7.06cm x 7.06cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolutions of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made fro the purpose.
The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. The machine works on 440 volts AC, three phase electrical supply. On request machine to operate on 230Volts A.C. supply can also be supplied.

Additional Information:
  • Item Code: ASI-645

Pulveriser

The Laboratory Pulverize is a disc type grinder, designed to grind virtually any material to produce a fine mesh sample in one operation. The instrument is useful for assaying , mining and for metallurgical, quarrying, aggregate processing, chemical, geological and industrial Laboratories. It is a self contained grinder, with a rotary disc, having a planetary movement in a vertical plane. This feature gives added life to the moving parts and produces a sample of uniform fineness.

Grinding is done between two discs-one stationery and the other revolving eccentrically at high speed. The discs are made from heat treated machinate metal. With the help of a convenient hand wheel, the size of the final product can be adjusted. This can be done, even while the machine is in operation. A self locking device holds the hinged grinding chamber in place and affords easy and quick access to it, for removal of ground samples and for cleaning. The Pulverize has a capacity of reducing about half of a kilogram of a quartz type sample to 100 mesh in a about a minute. The Pulverser is supplied complete with a 3 H.P motor, a starter, a “V” belt pulley drive and mounting wired for 440V, 3 Ph, 50Hz

LABORATORY PULVERSER:

  • Disc Diameter - 175mm.
  • Maximum Feed size - 6mm.
  • Yield - 250gms./min.
  • Size of Finished Product -100mesh

Additional Information:
  • Item Code: ASI-235

Small Roll Crusher

This comprises of two hardened alloy steel rollers with 100mm, faces and 250mm. diameters. The rollers are fitted to a steel shaft and are mounted on heavy duty gunmetal bearings. The outside bearings are provided with heavy duty compression springs. Which help in increasing the space between the rolls, when a piece of material cannot be crushed. Square threaded bolts are provided to adjust the gap between the rolls. The drive is by a heavy motor, through 'V' belts, to a set of gears and further to the rollers. A hopper is provided for feeding the material. The whole arrangement is mounted on a fabricated steel material. Supplied complete with a 3.0 H.P motor and starter.

Wired fro - 440V. 3 Ph. 50 Hz.
Feed Size - 10mm(maximum)
Product Size - 2.00mm and below

Additional Information:
  • Item Code: ASI-236

Large Roll Crusher

This comprises of two hardened alloy steel rollers have a face size of 150mm with 250mm, diameters. Supplied complete with a 5.0 H.P. motor and a starter. Wired for 440 V.3 Ph.50Hz. The rollers are fitted to a steel shaft and are mounted on heavy duty gunmetal bearings. The outside bearings are provided with heavy duty compression springs. Which help in increasing the space between the rolls, when a piece of material cannot be crushed.  The drive is by a heavy motor, through 'V' belts, to a set of gears and further to the rollers. A hopper is provided for feeding the material.

Additional Information:
  • Item Code: ASI-237
Looking for Cement & Concrete Testing Equipments ?
© A. S. I. Sales Private Limited
 
Desktop Site Back to top